Jeep Cherokee 2000 Service Manual - page 1588
(48) Coat thrust bearing and race assembly with
petroleum jelly and install it on clutch shaft. Bearing
faces up and toward case front as shown. Verify bear-
ing/race size. Bearing and race outer diameter is 47.8
mm (1.882 in.) and inside diameter is 33.6 mm (1.301
in.).
(49) Assemble second coast brake piston compo-
nents (Fig. 165).
(50) Install assembled second coast brake piston in
case. Verify that the piston rod contacts the second
coast brake band.
(51) Install replacement seals on second coast
brake piston cover and install cover in case.
(52) Install second coast brake piston snap ring
with snap ring plier tool (Fig. 166).
(53) Check second coast brake piston stroke as fol-
lows:
Fig. 162 Installing Ring Gear Bearing And Race
1 – THRUST BEARING
2 – RACE
3 – PLANETARY RING GEAR
Fig. 163 Installing Front Planetary And
Forward–Direct Clutch Assembly
1 – FRONT PLANETARY AND FOWARD-DIRECT CLUTCH
ASSEMBLY
Fig. 164 Checking Input Drum–To–Direct Clutch
Drum Clearance
Fig. 165 Assembling Second Coast Brake Piston
1 – E-CLIP
2 – PISTON
3 – O-RING
4 – PISTON SPRING
5 – SPRING AND RETAINER
6 – PISTON ROD
21 - 288
AW–4 AUTOMATIC TRANSMISSION
XJ
DISASSEMBLY AND ASSEMBLY (Continued)