- DL manuals
- Jeep
- Automobile
- Cherokee 2000
- Service Manual
Jeep Cherokee 2000 Service Manual - page 419
Other manuals for Cherokee 2000:
Service Manual
of
1970
Go
INSTALLATION
(1) Position the horn and mounting bracket unit
behind the front bumper.
(2) Reconnect the wire harness connector to the
horn connector receptacle.
(3) Position the horn and mounting bracket unit to
the radiator closure panel brace.
(4) Install and tighten the screw that secures the
horn and mounting bracket unit to the radiator clo-
sure panel brace. Tighten the screw to 28.5 N·m (21
ft. lbs.).
(5) Install the front underbody splash shield.
(6) Lower the vehicle.
(7) Reconnect the battery negative cable.
8G - 6
HORN SYSTEMS
XJ
REMOVAL AND INSTALLATION (Continued)