Jeep Cherokee 2000 Service Manual - page 1592
•
Outer diameter of bearing is 46.8 mm (1.844 in.)
and inside diameter is 26.0 mm (1.024 in.).
(68) Coat tabbed thrust race with petroleum jelly
and install it on planetary gear (Fig. 179). Race outer
diameter is 41.8 mm (1.646 in.) and inside diameter
is 27.1 mm (1.067 in.).
(69) Install assembled overdrive planetary gear
and clutch (Fig. 180).
(70) Coat thrust bearing and race assembly with
petroleum jelly and install it on clutch input shaft
(Fig. 181). Bearing and race outer diameter is 50.2
mm (1.976 in.) and inside diameter is 28.9 mm (1.138
in.).
(71) Coat thrust bearing race with petroleum jelly
and install it in oil pump (Fig. 182). Bearing race
outer diameter is 47.2 mm (1.858 in.) and inside
diameter is 28.1 mm (1.106 in.).
Fig. 176 Installing Overdrive Support Thrust Bearing
And Races
1 – THRUST BEARING
2 – UPPER RACE
3 – LOWER RACE
Fig. 177 Installing Overdrive Planetary Ring Gear
1 – OVERDRIVE PLANETARY RING GEAR
Fig. 178 Installing Ring Gear Thrust Bearing And
Race
1 – THRUST BEARING-RACE ASSEMBLY
2 – THRUST RACE (TABBED)
3 – OVERDRIVE PLANETARY RING GEAR
Fig. 179 Installing Planetary Thrust Race
1 – THRUST RACE (TABBED)
2 – OVERDRIVE PLANETARY
21 - 292
AW–4 AUTOMATIC TRANSMISSION
XJ
DISASSEMBLY AND ASSEMBLY (Continued)