Jeep Cherokee 2000 Service Manual - page 1579
(58) Check first/reverse brake piston operation
with compressed air (Fig. 134). Piston should move
smoothly and not bind or stick. If piston operation is
incorrect, case or piston may require replacement.
(59) Compress piston return springs with Tool
7539 and remove piston snap ring (Fig. 135).
(60) Remove Tool 7539 and remove piston return
springs.
Fig. 130 Removing Second Brake Piston Sleeve
1 – REMOVER TOOL
2 – PISTON SLEEVE
Fig. 131 Removing Rear Planetary, Second Brake
Drum And Output Shaft
1 – PLANETARY, BRAKE DRUM AND OUTPUT SHAFT
ASSEMBLY
Fig. 132 Removing/Installing Bearing And Race
Assembly
1 – BEARING AND RACE ASSEMBLY
Fig. 133 Checking Rear Bushing Inside Diameter
1 – BORE GAUGE
2 – REAR BUSHING
3 – TRANSMISSION CASE
XJ
AW–4 AUTOMATIC TRANSMISSION
21 - 279
DISASSEMBLY AND ASSEMBLY (Continued)