Jeep Cherokee 2000 Service Manual - page 1922
(M)
Malfunction Indicator Lamp (MIL) illuminated during engine operation if this DTC was
recorded (depending if required by CARB and/or EPA). MIL is displayed as an engine icon on
instrument panel.
P0131 (M)
1/1 O2 Sensor Shorted To Ground
Oxygen sensor input voltage maintained below normal
operating range.
P0132 (M)
1/1 O2 Sensor Shorted To Voltage
Oxygen sensor input voltage maintained above normal
operating range.
P0133 (M)
1/1 O2 Sensor Slow Response
Oxygen sensor response slower than minimum required
switching frequency.
P0134 (M)
1/1 O2 Sensor Stays at Center
Neither rich or lean condition is detected from the oxygen
sensor input.
P0135 (M)
1/1 O2 Sensor Heater Failure
Oxygen sensor heater element malfunction.
P0136 (M)
1/2 O2 Sensor Heater Circuit
Malfunction
Oxygen sensor heater element malfunction.
P0137 (M)
1/2 O2 Sensor Shorted To Ground
Oxygen sensor input voltage maintained below normal
operating range.
P0138 (M)
1/2 O2 Sensor Shorted To Voltage
Oxygen sensor input voltage maintained above normal
operating range.
P0139 (M)
1/2 O2 Sensor Slow Response
Oxygen sensor response not as expected.
P0140 (M)
1/2 O2 Sensor Stays at Center
Neither rich or lean condition is detected from the oxygen
sensor.
P0141 (M)
1/2 O2 Sensor Heater Failure
Oxygen sensor heater element malfunction.
P0143 (M)
1/3 O2 Sensor Shorted To Ground
Oxygen sensor input voltage maintained below normal
operating range.
P0144 (M)
1/3 O2 Sensor Shorted To Voltage
Oxygen sensor input voltage maintained above normal
operating range.
P0145 (M)
1/3 O2 Sensor Slow Response
Oxygen sensor response slower than minimum required
switching frequency.
P0146 (M)
1/3 O2 Sensor Stays at Center
Neither rich or lean condition is detected from the oxygen
sensor.
P0147 (M)
1/3 O2 Sensor Heater Failure
Oxygen sensor heater element malfunction.
P0151 (M)
2/1 O2 Sensor Shorted To Ground
Oxygen sensor input voltage maintained below normal
operating range.
P0152 (M)
2/1 O2 Sensor Shorted To Voltage
Oxygen sensor input voltage sustained above normal
operating range.
P0153 (M)
2/1 O2 Sensor Slow Response
Oxygen sensor response slower than minimum required
switching frequency.
P0154 (M)
2/1 O2 Sensor Stays at Center
Neither rich or lean condition is detected from the oxygen
sensor.
P0155 (M)
2/1 O2 Sensor Heater Failure
Oxygen sensor heater element malfunction.
P0157 (M)
2/2 O2 Sensor Shorted To Ground
Oxygen sensor input voltage maintained below normal
operating range.
P0158 (M)
2/2 O2 Sensor Shorted To Voltage
Oxygen sensor input voltage maintained above normal
operating range.
P0159
2/2 O2 Sensor Slow Response
Oxygen sensor response slower than minimum required
switching frequency.
P0160 (M)
2/2 O2 Sensor Stays at Center
Neither rich or lean condition is detected from the oxygen
sensor.
25 - 4
EMISSION CONTROL SYSTEMS
XJ
DESCRIPTION AND OPERATION (Continued)