Jeep Cherokee 2000 Service Manual - page 1637
through all gears. Release the shift button at least
once during this procedure. The ignition key should
not go to the LOCK position.
(f) Return transmission to the PARK position
without applying the brake.
(8) Move shift lever back to PARK and check igni-
tion switch operation. You should be able to turn
switch to LOCK position and shift lever release but-
ton/lever should not move.
TRANSMISSION THROTTLE VALVE CABLE
ADJUSTMENT
(1) Shift transmission into Park, shut engine off
and raise hood.
(2) Press cable release button (Fig. 302).
(3) Push cable conduit back into cable sheath as
far as possible (Fig. 303).
(4) Rotate lever on throttle body to wide open
throttle position. Cable will ratchet to correct adjust-
ment point as lever is rotated (Fig. 303).
Fig. 301 Park Lock Cable Attachment
1 – PARK LOCK CABLE
2 – CABLE LOCK BUTTON
3 – SHIFT LEVER ASSEMBLY
4 – SHIFT CABLE
Fig. 302 Throttle Cable Components
1 – CONDUIT
2 – RELEASE BUTTON
3 – CABLE CONNECTOR
4 – CABLE
Fig. 303 Throttle Cable Adjustment
1 – RELEASE BUTTON
2 – ROTATE THROTTLE BODY LEVER TO W. O. T. POSITION
3 – CABLE
4 – CABLE BRACKET
XJ
AW–4 AUTOMATIC TRANSMISSION
21 - 337
ADJUSTMENTS (Continued)