Jeep Cherokee 2000 Service Manual - page 462
LICENSE PLATE LAMP BULB
REMOVAL
(1) Remove screws attaching license plate lamp
housing to liftgate.
(2) Rotate
bulb
socket
counter-clockwise
and
remove bulb socket from lamp housing.
(3) Pull bulb from socket.
INSTALLATION
(1) Install bulb in lamp socket.
(2) Install bulb socket in lamp housing.
(3) Install screws attaching license plate lamp
housing to liftgate.
CENTER HIGH MOUNTED STOP LAMP
(CHMSL) BULB
REMOVAL
(1) Remove the screws attaching the lamp housing
to the liftgate.
(2) Rotate bulb socket 1/4 turn counter-clockwise
and pull from housing (Fig. 6).
(3) Pull bulb from socket.
INSTALLATION
(1) Push bulb into socket.
(2) Position socket in lamp and rotate 1/4 turn
clockwise.
(3) Install screws attaching lamp housing to the
liftgate.
UNDERHOOD LAMP BULB
REMOVAL
(1) Insert a small flat blade in the access slot
between the lamp base and lamp lens.
(2) Pry the lamp lens upward and remove the
lamp lens (Fig. 7).
(3) Depress the bulb terminal inward (Fig. 8) to
release the bulb.
INSTALLATION
(1) Engage the replacement bulb wire loop to the
terminal closest to the lamp base wire connector.
Fig. 6 CHMSL Bulb
1 – CHMSL BULB
2 – BULB SOCKET
3 – CHMSL LAMP HOUSING
Fig. 7 Underhood Lamp Lens
1 – LAMP
2 – LAMP LENS
Fig. 8 Underhood Lamp Bulb
1 – BULB
2 – DEPRESS TERMINAL INWARD
3 – BULB WIRE LOOP
4 – LAMP BASE
8L - 12
LAMPS
XJ
REMOVAL AND INSTALLATION (Continued)