- DL manuals
- Jeep
- Automobile
- Cherokee 2000
- Service Manual
Jeep Cherokee 2000 Service Manual - page 1667
Other manuals for Cherokee 2000:
Service Manual
of
1970
Go
(15) Remove front bearing retainer seal with suit-
able pry tool.
(16) Install new front bearing retainer seal with
Installer 7884 (Fig. 53).
(17) Remove seal from oil pump housing with a
suitable pry tool
Fig. 50 Seating Input Shaft Bearing
1 – SNAP RING
2 – INPUT SHAFT BEARING
Fig. 51 Remove Input Gear Pilot Bearing
1 – DRIFT
2 – INPUT GEAR
Fig. 52 Install Input Gear Pilot Bearing
1 – SPECIAL TOOL C-4171
2 – SPECIAL TOOL 5065
3 – INPUT GEAR
Fig. 53 Install Front Bearing Retainer Seal
1 – FRONT BEARING RETAINER
2 – SPECIAL TOOL 7884
21 - 362
NV231 TRANSFER CASE
XJ
DISASSEMBLY AND ASSEMBLY (Continued)