Jeep Cherokee 2000 Service Manual - page 1349
Other manuals for Cherokee 2000:
Service Manual
of
1970
(8) Remove shift shaft detent plunger and spring
(Fig. 17). Use pencil magnet to remove spring then
plunger, if necessary.
(9) Remove bolts attaching input shaft bearing
retainer to front housing (Fig. 18).
Fig. 15 Shift Tower Removal
1 – SHIFT TOWER AND LEVER ASSEMBLY
2 – SHIFT SOCKET
3 – SEAL
Fig. 16 Shift Shaft Lock Bolt Removal
1 – SHIFT SHAFT LOCK BOLT
2 – SHAFT SOCKET
Fig. 17 Detent Plunger And Spring Removal
1 – FRONT HOUSING
2 – PLUG
3 – SPRING
4 – PLUNGER
Fig. 18 Input Shaft Bearing Retainer Bolt Removal—
Typical
1 – INPUT SHAFT BEARING RETAINER
2 – RETAINER BOLTS
XJ
NV3550 MANUAL TRANSMISSION
21 - 49
DISASSEMBLY AND ASSEMBLY (Continued)