NEC SV8500 Operation And Maintenance Manual - page 175
– 128 –
CHAPTER 2
Operations of SV8500 Server
(11) Connection Route Peg Count
The following shows Connection Route Peg Count Listup Reports and description of symbols in the report.
•
C_RT
: Connection Route
•
Attempts
: The number of times that a trunk selection was attempted.
•
Block
: The number of times that trunk busy was encountered when accessing
a trunk.
•
Outgoing
: The number of times trunks were accessed. The number does not al-
ways coincide with the number obtained by subtracting “Block” from
“Attempts”.
•
Incoming
: The number of call terminations.
•
Terminate
: The number of connected call terminations.
•
Tandem
: The number of incoming calls that directly provide tandem connection
(not via the Attendant Console)
•
Others
: The number obtained by subtracting “Terminate” and “Tandem” from
“Incoming”. These calls include the following scenarios:
-Incoming calls terminated but released before the line is connected.
-Calls to unused numbers
Note:
The traffic data on the above report is an example.
1
13
9
1
3
6
0
6
0
1
5
0
Start Time: 10/27 21:30
End Time: 10/27 22:00
10, 27, 2005
[LOCALHOST::DTFA]
* Display of Connection Route Peg Count Data (DTF601)*
Attempts
Block
4
346
23
Outgoing Terminate
TRAFFIC MEASUREMENT
Tandem
16
Incoming
C_RT
Others
9
167
11
187
78
156
64
134
69
8
Page (UP)
Page (Down)
Save Text File
0