NEC SV8500 Operation And Maintenance Manual - page 97
– 50 –
CHAPTER 2
Operations of SV8500 Server
3.3 Initialization by PCPro Tools
The following initialization type is available.
•
Office Data Load & Program Load (& OS Load) Initial
STEP 1
Run PCPro Tools on a PC.
STEP 2
Select “System Control” and then click “Execute” button.
STEP 3
Select “System Reboot” from the list box, and then click “Execute” button.
•
Initialization starts.
•
PCPro is automatically placed in logout state.
Note:
For the detail, refer to “UNIVERGE SV8500 Command Manual“.
STEP 4
Make sure that the following lamps light green on the EMA card.
STEP 5
Log into the system again from the PCPro.
STEP 6
Set the current date and time from the PCPro. (Refer to
STEP 7
Release the indicated alarm. (Refer to
Lamp name
Status
PWR
Lights green
LINK
Lights green
ACT
Lights green