NEC SV8500 Operation And Maintenance Manual - page 844
– 797 –
CHAPTER 7
Maintenance Commands
DIMG: Display Information of Media Gateway
1. Functional Outline
This command is used to display the information of the Media Gateway that is managed by SV8500 (PHI).
2. Parameters
Input Data
View Type:
Select the item to be displayed.
Media Gateway Information: Information of Media Gateway belonging to SV8500.
ISDN Trunk (PRI) Information:Information of MG(PRI) belonging to SV8500.
PH LENS:
Equipment Number (Even Number, Five Digits)
Output Data
CNT:
Counter
LENS:
Line Equipment Number Note
FPC:
Fusion Point Code
MG Type:
Media Gateway Type
Status:
Registration Status
IP:
IP Address assigned to Media Gateway
MAC:
MAC Address of Media Gateway
SEC:
Encryption status for voice data [O (encrypted) / X (not encrypted) / Readout Failed /
Blank (system or terminal does not support encryption)]
TN:
Tenant Number
RT:
B-Channel Route Number of Media Gateway
TK:
Trunk Number
ISDN Status:
ISDN Status of Media Gateway
Action Mode:
Operation Mode of Media Gateway
Reference
Reference Information
Note:
For MG(PRI) (SIP), the first channel of HW assigned by AMGIL command is displayed.
Buttons
Get:
Retrieve the line information.
CSV File Output:
Output the report in CSV format.
Exit:
Exit this command.