NEC SV8500 Operation And Maintenance Manual - page 238
– 191 –
CHAPTER 2
Operations of SV8500 Server
STEP 3
Type the command “bin” to prepare to transfer the files in binary.
STEP 4
Type the command “put” to upload a program file to FTP server (Telephony Server).
Example) Transfer “itlisipe.tgz” from the remote PC to the directory of Telephony Server.
STEP 5
Make sure that the file has been written in the specified directory using “ls” or “dir” command.
STEP 6
Exit the FTP server.
To exit the FTP server, use “bye” or “quit” command.
Firmware Download to IP Stations by “Firmware Auto Update Tool”
STEP 1
Activate the FTP server process according to “Programming.”
Note:
“Maintenance User Account Assignment” setting is not required.
STEP 2
Execute further operations referring to the “Firmware Auto Update Tool for DT700 Series” sec-
tion in Peripheral Equipment Description.
16.2Service Conditions
•
The table below provides command information related to FTP control and the directory tree in FTP server
(Telephony Server).
Command List Related FTP
COMMAND
MEANING
DESCRIPTION
bin
Switch a type to binary mode.
This command must be entered before transferring
the files.
cd
Change the directory.
ftp
Make the FTP connection.
delete
Delete the files.
get
Copy the files into a remote
terminal.
ftp>bin
ftp>put
itlisipe.tgz
ftp>dir
ftp>bye