NEC SV8500 Operation And Maintenance Manual - page 883
– 836 –
CHAPTER 7
Maintenance Commands
DTF201: Display of Service Peg Count Data
1. Functional Outline
This command is used to display the result of traffic measurement data for TYPE=6 (Service Peg Count)
assigned by the ATRF command.
2. Parameters
Traffic Data 1:
Terminal Traffic-DTF101
Route Traffic-DTF102
Station Peg Count-DTF103
Attendant Peg Count-DTF104
Route Peg Count-DTF105
Traffic Data 2:
Service Peg Count-DTF201
Traffic Data 3:
UCD Route Peg Count-DTF301
UCD Group Peg Count-DTF302
UCD Station Peg Count-DTF303
Traffic Data 5:
Attendant Answer Peg Count-DTF501
Traffic Data 6:
Connection Route Peg Count-DTF601
Connection Route Traffic-DTF602
Traffic Data 7:
IP Service Peg Count - DTF701
IP Service Traffic - DTF702
Traffic Data 8:
SIP Service Peg Count - DTF801
System Entire Peg Count
Each Server Peg Count