NEC SV8500 Operation And Maintenance Manual - page 752
– 705 –
CHAPTER 7
Maintenance Commands
The information of already registered firmware files are shown on Registered File Name List field (by reading
out “TermFile.txt” file when the ATDL command is executed). The listed firmware files are to be downloaded
to the specified terminals according to each terminal type and version.
The following table shows which IP terminals/equipment are available for this command and the necessary
information (Terminal Type, Hardware Type (HWTP), Hardware Version (HWVER) and File Name) to
download the firmware files of the available IP terminals/equipment. Pressing Insert button shows Addition of
Firmware File Name screen to add a new firmware file to the list. Enter Terminal Type, Hardware Type
(HWTP), Hardware Version (HWVER), and File Name according to the descriptions in the table.
u:
Available N: Not Available
Terms in Manual
Product Name
EU
Product Name
Terminal
Type on
PCPro
Avail-
abil-
ity
HWT
P
HWV
ER
File Name
(Default)
Analog 2MC
SN8029 MC2A-A
-
-
N
-
-
-
SN8029 MC2A-B
-
Analog MC
Note 1
u
21
-
2amcmwlist.txt
8LC Card
SCA-8LCA
SCA-8LCA-EMEA
-
8MC SIP
Note 1
u
B1
-
8amcmwlist.txt
MG-PRI/MG-PRA
SN8032 MG15M-
XX(MGEB-A)
-
PRI1.5 MG
N
64
-
mgprimwlist.txt
SN8023 MG2M-
XX(MGEA-A)
-
PRI2.0 MG
N
65
-
MG(PRI) (1.5M)
Box [MG-24PRIA]
MG-24PRIA
-
MG-PRI1.5
SIP
u
A8
-
MG(PRI) (2M) Box
[MG-30PRIA]
MG-30PRIA
-
MG-PRI2.0
SIP
u
A9
-
MG(PRI) (1.5M)
Card [SCA-
24PRIA]
SCA-24PRIA
SCA-PRI-SHA24
MG-PRI1.5
SIP
u
A8
-
MG(PRI) (2M)
Card [SCA-
30PRIA]
SCA-30PRIA
-
MG-PRI2.0
SIP
u
A9
-
MG-T1(SIP) Card
[SCA-24DTIA]
-
MG-T1[SIP]
u
AF
-
mgdtimwlist.txt
MG-T1(SIP) Box
[MG-24DTIA]
-
MG-BRI
MG-2BRI-XX
-
BRI MG
Note 1
u
63
-
mgbrimwlist.txt
MG(BRI) Box
[MG-2BRIA]
MG-2BRIA
-
MG-BRI SIP
Note 1
u
A3
-
mgbrisiplist.txt
MG(BRI) Card
[SCA-2BRIA]
SCA-2BRIA
-