NEC SV8500 Operation And Maintenance Manual - page 237

– 190 –

16. FTP SERVER SUPPORT (LAN1)

When Telephony Server is used as an FTP server, the following file transfer services are supported between a

remote PC and CF cards.

•

IP Terminal Program Upload/Download

During “Terminal for Download” operation by ATDL command, new firmware supposed to be download-

ed to IP Stations can be uploaded to Telephony Server using the FTP server process. Then IP Stations can

download the firmware from Telephony Server as FTP clients. For more information, refer to IP Device

Firmware Remote Download [I-47] in Data Programming Manual - Business

•

Firmware Download to IP Stations using “Firmware Auto Update Tool”

DT700 Series can download new firmware from Telephony Server using “Firmware Auto Update Tool.”

16.1Operating Procedure

IP Terminal Program Upload/Download

STEP 1

Start up a remote PC which FTP client software is installed in. Then log in to FTP server.

Enter Telephony Server’s IP address (

Note 1

) after FTP command using FTP client software. 

Note 1:

Enter the IP address of LAN1 connector on ACT side CPU/STBY side CPU by the ATDL command.

•

For the single CPU, enter the ACT side CPU IP address.

•

for the dual CPU, enter each IP address (#0, #1) of ACT side CPU/STBY side CPU by the ATDL

command

Example) Log in to Telephony Server (10.41.207.224) via FTP. 

Note 2

Note 2:

The files are transferred to/from the directory in which a connection is made via FTP. For examples,

in the following case, the directory “C:\temp” is used to transfer files to/from FTP server (Telephony

Server).

STEP 2

Enter login name and password to log in to Telephony Server.

Example) XXXX is entered as a login name.

Note:

The following message appears when login to Telephony Server is succeeded. 

C:\temp>ftp 10.41.207.224

230 User XXXX logged in.