NEC SV8500 Operation And Maintenance Manual - page 786
– 739 –
CHAPTER 7
Maintenance Commands
CLPB: Control of Local Phone Book
1. Function Outline
This command enables deletion, copy and move of Local Phone book data. Phone book data (names and dial
numbers) are not displayed during each operation.
2. Parameters
Input Data
Process Type
Phone book data delete:
Select to delete Local Phone book data.
All Local Phone book data for either of specified STN, TELN(LDM),
TELN(NDM) or LENS can be deleted. For the FCCS System, data deletion is
available only for Local Phone book data of a terminal accommodated in node
to which PCPro logins.
Phone book data copy:
Select to copy Local Phone book data.
All Local Phone book data can be copied by specifying either of STN,
TELN(LDM), TELN(NDM) or LENS as the original data and destination for
copy. For the FCCS System, data copy is available only for Local Phone book
data between terminals accommodated in node to which PCPro logins. Note 1
Phone book data move:
Select to move Local Phone book data.
All Local Phone book data can be moved to the specified destination by speci-
fying either of STN, TELN(LDM), TELN(NDM) or LENS as the original data
and moving destination. For the FCCS System, moving data is available only
for Local Phone book data between terminals accommodated in node to which
PCPro logins. Note 2, Note 3
Note 1:
“Phone book data copy” is not available if Phone book data exists in the destination.
Note 2:
“Phone book data move” is not available if Phone book data exists in the destination.
Note 3:
If “Local Phone book data move” is executed, all of originally moved data will be cleared.
Parameter Type
STN:
Select to delete/copy/move the data for specified Physical Station Number.
TELN(LDM):
Select to delete/copy/move the data for specified Telephone Number (LDM).
TELN(NDM):
Select to delete/copy/move the data for specified Telephone Number (NDM).
LENS:
Select to delete/copy/move the data for specified Line Equipment Number.