NEC SV8500 Operation And Maintenance Manual - 33-A: Mux Clock Restore

– 437 –

CHAPTER 3

System Messages

33-A: MUX Clock Restore

This message displays when the MUX card, whose clock function was detected as faulty, is recovered.

 Unit, MG number for MUX card, 

which recovered from a clock failure

 RLS Data

Default Alarm

Default Grade

Grade Modified

Lamp Modified

NON

3

1:

XXXX

0000

0000

0000

2:

0000

0000

0000

0000

3:

0000

0000

0000

0000

4:

0000

0000

0000

0000

5:

0000

0000

0000

0000

6:

0000

0000

0000

0000

7:

0000

0000

0000

0000

8:

0000

0000

0000

0000

9:

0000

0000

0000

0000

b7

b4

b3

b2

b1

b0

b7

b3

b2

b1

b0

1 2

b0-b1: Unit number for the recovered MUX card

b2:

MG number for the recovered MUX card

b3:

0/1 = Fault recovery in the MUX System 0/

Fault recovery in MUX System 1

b4:

0/1 = Faulty MUX is in ACT/

Faulty MUX is in STBY

1

RLS Data:Clock alarm information on the recovered MUX card

b1:

0/1 = -/FH failure for 2M PCM Highway

b2:

0/1 = -/CLK failure for 2M PCM Highway

b3:

0/1 = -/4M CLK failure for PM

2