NEC SV8500 Operation And Maintenance Manual - page 941
of
975
– 894 –
CHAPTER 7
Maintenance Commands
PMBU: Port Microprocessor Back Up
1. Functional Outline
This command is used to save the contents of the Port Microprocessor (PM) onto a Floppy Disk (FD) or verify
them. Information of firmware (Program Code) also appears on the screen.
2. Parameters
Input data
Direction Select: Port Microprocessor to PCPro
Verify Port Microprocessor
Verify PM with Error List Auto Verify Afterward can be performed when designating Port Micropro-
cessor to PCPro.
PM Information:Module Group
Unit
Group
Data Size (1-6)
1=2 kbytes
2=4 kbytes
3=8 kbytes
4=16 kbytes
5=32 kbytes
6=64 kbytes
Output data
Office
SP Number: Information of firmware (Program Code)
SP Issue: Information of firmware (Program Code)