NEC SV8500 Operation And Maintenance Manual - page 812
– 765 –
CHAPTER 7
Maintenance Commands
PC Port Control:
Select either “Connection” or “Disconnection”.
All Select:
Mark the checkbox when selecting all data in the list.
Auto Scroll:
By marking the checkbox, the data in the list is automatically scrolled to the
end.
Note:
By marking the checkboxes next to the numbers in the list, the individual readout data can be selected.
Output Data
No.:
Each data in the list is numbered. (1-n)
Result:
Status of the system
TN:
Tenant Number (1-63)
STN:
Station Number (Up to 16 digits (0-9, *, #))
LENS: Line
Equipment
Numbers
UGN (NDM):
User Group Number (NDM) (1-255)
TELN (NDM):
Telephone Number (NDM) (Up to 16 digits (0-9, *, #))
UGN (LDM):
User Group Number (LDM) (1-255)
TELN (LDM):
Telephone Number (LDM) (Up to 16 digits (0-9, *, #))
IP Address:
IP address of Terminal (0.0.0.1 - 255.255.255.254)
Connection Status:
Current status of the PC port (Connection/Disconnection)
Connection Status (LDM):Status of the PC port on the office data (Connection/Disconnection)
Buttons
Get:
Readout the data
Execute: Start
the
process.
Skip:
Cancel the data readout or the execution of the process.
Exit:
Exit this command.