NEC SV8500 Operation And Maintenance Manual - page 951
– 904 –
CHAPTER 7
Maintenance Commands
RPID : Remove of Pad Lock ID Data
1. Functional Outline
This command is used to release the PAD LOCK ID Code setting of each analog/Dterm station by the PCPro
operation.
2. Parameters
Input Data
TN:
Tenant Number
Enter the Tenant Number in which the target station belongs.
STN:
Station Number [Max. 6 digits]
Designate the station number whose PAD LOCK ID Code setting is to be re-
leased.
Output Data
PID:
PAD LOCK ID Code
RSC:
Route Restriction Class [0-15]
SFC:
Service Feature Class [0-15]
Note:
It is not available to display and list up the ID codes on the PCPro screen.
Buttons
Get: Get information for the PAD LOCK ID Code assigned to the station/tenant.
Del.: Delete information for the PAD LOCK ID Code assigned to the station/tenant.
Exit: Exit this command.