NEC SV8500 Operation And Maintenance Manual - page 917
of
975
– 870 –
CHAPTER 7
Maintenance Commands
[Input Data]
Set Type: Input/File
•
When Input is selected:
IP Address Input Type
When Individual is selected:
IP Address: Enter the target IP address.
When Collective is selected:
Enter the range of IP addresses in the START IP Address and END IP Address boxes.
•
When File is selected:
File Name
Select a saved CSV file by pressing “Reference” button for specifying the target IP addresses. The
kind of CSV file is indicated in the File Kind box. Note
Note:
CSV files output by the STN Verify tab cannot be selected.
[Output Data]
IP Address
Ping result (system-0)
Ping result (system-1)
Note