NEC SV8500 Operation And Maintenance Manual - page 885

– 838 –

CHAPTER 7

Maintenance Commands

DTF302: Display of UCD Group Peg Count Data

1. Functional Outline

This command is used to display the result of traffic measurement data for TYPE=9 (UCD Group Peg Count)

assigned by the ATRF command.

2. Parameters

Traffic Data 1:

Terminal Traffic-DTF101

Route Traffic-DTF102

Station Peg Count-DTF103

Attendant Peg Count-DTF104

Route Peg Count-DTF105

Traffic Data 2:

Service Peg Count-DTF201

Traffic Data 3:

UCD Route Peg Count-DTF301

UCD Group Peg Count-DTF302

UCD Station Peg Count-DTF303

Traffic Data 5:

Attendant Answer Peg Count-DTF501

Traffic Data 6:

Connection Route Peg Count-DTF601

Connection Route Traffic-DTF602

Traffic Data 7: 

IP Service Peg Count - DTF701

IP Service Traffic - DTF702

Traffic Data 8: 

SIP Service Peg Count - DTF801

System Entire Peg Count

Each Server Peg Count