NEC SV8500 Operation And Maintenance Manual - page 966
– 919 –
APPENDIX A
APPENDIX A Minor Version Update for Online Software
1. GENERAL
This feature is used to apply patches to the Telephony Server’s program.
2. PRECAUTIONS
(1) For dual–CPU system, apply patches to STBY side as well as ACT side. Otherwise, after system change-
over to STBY side occurs, the system will operate on a program without the patch applied.
(2) Maximum of 255 patches can be retained in the Telephony Server.
(3) When applying multiple patches, application will fail unless all files are in correct format.
3. APPLYING THE PATCH FILES
(1) Use PCPro Tools to upload patch files to the Telephony Server.
Note 1:
Make sure to upload the patch files to each Telephony Server side (ACT side and/or STBY side) targeted
for patch application.
STEP 1
Copy the obtained patch files to the desired directory of the maintenance console.
Note 2:
Designate a folder to save the patch files to. NEVER place files other than patch files in the designated
folder.
CAUTION
Follow this procedure only when instructed to do so by the service technician.
[1]
[2]
Maintenance Console
Telephony Server
1. Use PCPro Tools to upload patch files to the Telephony Server.
2. Use XPAT command to apply uploaded patch files to the Telephony Server.