NEC SV8500 Operation And Maintenance Manual - page 741
– 694 –
CHAPTER 7
Maintenance Commands
AACT: Assignment of Activation Code
1. Functional Outline
This command is used to register an Activation Code. Registering the activation code clears the alarm, which
requires the user to input the activation code.
Note:
Before executing this command, specify the following with ASYDL command.
SYS1 INDEX513: 01
2. Parameters
Output Data
Hardware KeyCode:
Hardware Key Code
Note:
Each Hardware Keycode of System0 and System1 will be shown when the System is in dual configura-
tion.
Software Keycode:
CNT
Software Keycode
Software Name
Button
Get:
Readout the Software Keycode of all the Software installed to the system.
Input Data
Activation Code:
Specify the Activation Code.(16 digit)
The temporary activation code is labelled on the center of the back of the CD.
Button
Get:
Retrieve the Activation Code with the SV8500.
Set:
Register the Activation Code.
Button
File Save:
Output the displayed Hardware Keycode and the Software Keycode to the text
file.
Exit:
Exit this command.