NEC SV8500 Operation And Maintenance Manual - page 771
of
975
– 724 –
CHAPTER 7
Maintenance Commands
When DELETE is selected in the TYPE/KIND selection list box
Input Data
RT:
Route Number
TK(START):
First Trunk Number [1-768]
TK(END):
Last Trunk Number [1-768]
STEP:
Trunk Count-up Step [1-10]
Buttons
Execute:
Delete the input data.
Cancel:
Cancel the deletion.
Exit:
Exit this command.
Output Data
TK:
Trunk Number
STATUS:
Result of Deletion
OK=Deletion Successful
Note 1:
In this parameter, specify the size of increment between the consecutive trunk numbers deleted. See the
example below:
Example:
Note 2:
When the deletion is successful, OK is displayed here. Otherwise (i.e. the deletion is rejected), related
error message is displayed.
INPUT DATA
RESULT
TK(START)=1
A Trunk Number is deleted by increments of 2:
TK(END)=21
STEP=2