NEC SV8500 Operation And Maintenance Manual - 4-C: Both Tsw Ready Failure
of
975
– 246 –
CHAPTER 3
System Messages
4-C: Both TSW Ready Failure
This message displays when a Ready Failure occurs in both systems as a result of the TSW card having a failure
or the card is not mounted properly.
Unit and MG number of fault
detection
Reference:
See Chapter 5
Speech Path System Fault - When Dial Tone (DT) Cannot Be Heard
procedure.
Default Alarm
Default Grade
Grade Modified
Lamp Modified
MN
3
1:
XX00
0000
0000
0000
2:
0000
0000
0000
0000
3:
0000
0000
0000
0000
4:
0000
0000
0000
0000
5:
0000
0000
0000
0000
6:
0000
0000
0000
0000
7:
0000
0000
0000
0000
8:
0000
0000
0000
0000
9:
0000
0000
0000
0000
b7
b0
1
b0:
0/1 = TSW System 0/TSW System 1
Note:
When Ready Failure occurs in both systems, the [4-C]
message is separately issued twice: “0” displays in one
message, and “1” in the other message.
1