NEC SV8500 Operation And Maintenance Manual - page 780

– 733 –

CHAPTER 7

Maintenance Commands

CBND: Calculate Bandwidth Data

1. Functional Outline

This command is used to calculate bandwidth data. 

2. Parameters

Input data

START LOC-ID: Start location ID (0-4095)

END LOC-ID:

End location ID (0-4095)

Cycle:

Observation Cycle (10-300 seconds)

Start time:

Start time of observation (Year/Month/Day/Hour/Minute/Second)

DisplayRange:

Transit graph display time range of bandwidth.

Select the time (30 minutes, 1 hour, 2 hours, 4 hours, 6 hours, 12 hours, 24 hours).

Output Data

Start time:

Start time of observation

Last time of acquisition:Last time of observation

Current bandwidth data

A LOC-ID:Location ID A

B LOC-ID:Location ID B

Used bandwidth [Kbps]:Current used bandwidth value

Limit value [Kbps]:Current limit value of bandwidth

Average value [Kbps]:Average value of bandwidth in the observing period

Maximum value [Kbps]:Maximum value in the observing period

Maximum time:Time recorded maximum value (Year/Month/Day/Hour/Minute/Sec-

ond)

Restriction:Restriction counter

Buttons

Start:

Calculate bandwidth data.

Stop:

Stop the process.