NEC SV8500 Operation And Maintenance Manual - page 899
of
975
– 852 –
CHAPTER 7
Maintenance Commands
DTF301N: Display of UCD Route Peg Count Data for FCCS Network
1. Functional Outline
This command is used to display the result of traffic measurement data for TYPE=8 (UCD Route Peg Count)
assigned by the ATRFN command.
2. Parameters
Traffic Data 1:
Terminal Traffic-DTF101N
Route Traffic-DTF102N
Station Peg Count-DTF103N
Attendant Peg Count-DTF104N
Route Peg Count-DTF105N
Traffic Data 2:
Service Peg Count-DTF201N
Traffic Data 3:
UCD Route Peg Count-DTF301N
UCD Group Peg Count-DTF302N
UCD Station Peg Count-DTF303N
Traffic Data 5:
Attendant Answer Peg Count-DTF501N
Traffic Data 6:
Connection Route Peg Count-DTF601N
Connection Route Traffic-DTF602N