NEC SV8500 Operation And Maintenance Manual - page 497
– 450 –
CHAPTER 3
System Messages
Fault Information (INF)
Details on Fault Information (FLT)
b7
b6
b5
b4
b3
b2
b1
b0
b7
b6
b5
b4
b3
b2
b1
b0
When
= 01 or 02 Hex.:
01H: Hardware Error
02H: Ether Error
03H: IP Error
04H: TCP Error
When
= 03 Hex.:
01H: RTP/RTCP Error
When
= 04 Hex.:
01H: Hardware Error (Removal of Ether Cables, Initialization Fault,
etc.)
02H: Ether Error (Fault related to Ether Drivers)
03H: IP Error (Warning related to IP Packets)
04H: RTP/RTCP Warning (Warning related to RTP Packets)
05H: PM Error (Fault related to ELC)
06H: NC Error (Fault related to IP Functions)
07H: PCM Error (Fault related to PCM)
08H: VCT Error (Fault related to VC)
When
= 05 Hex.:
01H: iLP-PM Command Error
02H: Registry Error
03H: Health Check Error
04H: Communication Error
When
= 06 Hex.:
01H: Internal fault of PHL(PHE)/IP PAD is detected.
When
=
07 HEX:
05H: TCP Fault
06H: RTP Warning (Voice)
07H: Processor Error
When
=
08 HEX:
01H: TCP Link Fault Warning
When
=
09 HEX:
02H: Internal PHF fault
Socket related processing error
03H: Data transmission error
Data send/receive error
3
3
3
3
3
3
3
3
4
This data can be analyzed by seeing combination of the data.
See the tables on the following pages:
5