NEC SV8500 Operation And Maintenance Manual - page 750
– 703 –
CHAPTER 7
Maintenance Commands
Specify File Storage Directory:
Click this check box to specify the directory where the firmware files are stored on the FTP Server, and
enter the directory name within 63 characters.
Note:
Do not use this operation in SV8500.
Specify Download Time:
Click this check box to activate automatic download at a specified time. Enter Start Day (Year, Month, Day)
and Start Time (Hour, Minute, Second) to each field.
The information of IP terminals that are already registered are listed in this field. Pressing Exe button executes
firmware updating to the terminals listed.
Press the Insert button to register a new IP terminal and add it to the list using the “Additional Terminal
Information” screen. In this screen, terminals can be searched for by specifying Station Number, LENS, or the
Terminal Type.
How to Specify Terminal
Click one of the radio buttons to specify the type of search.
•
Specify Station Number
Click this button to search for the terminal by a specific Tenant Number (TN) and Station Number
(STN).
•
Specify Line Equipment Numbers
Click this button to search for a terminal by a specific Line Equipment Number (LENS).
•
Specify Terminal Type
Click this button to search for a terminal by a specific Terminal Type, confirming hardware type/ver-
sion and current firmware version.
Terminal
Select the terminal type in the combo box (all the terminal types registered in the Firmware File Name field are
shown on the drop down list). Hardware Type (HWTP) and Hardware Version (HWVER) of selected terminal
type are automatically indicated. Refer to the table on the next page for HWTP and HWVER of each terminal
type.
Note:
HWVER is indicated only when 2-byte firmware version of terminal is selected in Terminal Type.