NEC SV8500 Operation And Maintenance Manual - page 813
of
975
– 766 –
CHAPTER 7
Maintenance Commands
CPRS: Controlled Alternate PRSCs
1. Functional Outline
This command is necessary for the Controlled Alternate PRSCs function. It either selects the class used between
two priority restriction classes (Normal or Urgent), or indicates the class used. This command is allowed only
when Bit1 of SYS 1, INDEX 59 is “1” (Controlled Alternate PRSCs in service).
2. Parameters
N/U:
Priority Restriction Class [N/U]
N=Normal
U=Urgent