NEC SV8500 Operation And Maintenance Manual - page 954
– 907 –
CHAPTER 7
Maintenance Commands
The system initialize is executed for STBY side by loading the program and the office data from the CF
card to MEM.
The system initialize is executed for STBY side by restarting the system.
The system initialize is executed for STBY side by shutting the system down.
Note 1:
This parameter is only available for North America.
< For Redundant Data Memory Backup on Individual Hard Drive >
Click Option in the menu bar, and select Drive Select. A window, with the following parameters, appears.
On the window, designate the affected drive:
Program:
Drive A (default setting)
Drive D
Office Data:
Drive B (default setting)
Drive C
Note 2:
This data must be specified only when using the Redundant Data Memory Backup on an Individual
Hard Drive function.
Buttons
Execute: Execute the specified system initialization.
Exit: Exit this command.