NEC SV8500 Operation And Maintenance Manual - page 931
of
975
– 884 –
CHAPTER 7
Maintenance Commands
MBST_T: Make-Busy of Station – Telephone Number
1. Functional Outline
This command is used to assign the IDLE/BUSY status of stations, by using Telephone Numbers. This
command is only available at NCN (for FCCS network).
2. Parameters
Input Data
UGN:
User Group Number
TELN:
Telephone Number (maximum 16 digits)
MB:
Make-Busy Information
Output Data
FPC:
Fusion Point Code (1-253)
TN:
Tenant Number
STN:
Physical Station Number
(a maximum of five digits for Business system, and six digits for Hotel system)
Note:
This data is for display only.
Buttons
Get:
Get information on the station.
Set:
Execute the IDLE/BUSY performance.
Exit:
Exit this command.