NEC SV8500 Operation And Maintenance Manual - page 239
– 192 –
CHAPTER 2
Operations of SV8500 Server
•
Directories in the CF card differ in each maintenance user account assigned by ADTM command. If files
are written using the maintenance user account “A” for example, these files cannot be browsed using the
maintenance user account “B.”
•
When Telephony Server is logged in using login name of the maintenance user account, the following di-
rectories and files exist in default state. However, do not use these directories and files.
Directory:
bin
lib
File:
..bash_logout
..bash_logout.rpmorig
..bash_profile
..bash_profile.rpmorig
..bashrc
..bashrc.rpmor
•
When the system is in Dual Configuration, the maintenance user account can be used for both of #1 and #0
CPU CF cards. When writing the same files to both #1 and #0 CPU CF cards, IP address for each CPU CF
card needs to be entered because files are operated on CPU CF card bases via FTP server.
•
When the maintenance user account is deleted, all of the written files and created directories using the ac-
count are also deleted.
•
A maximum of 20 FTP clients can access simultaneously.
•
Change the transfer method from ASCII (default) to binary form by using “bin” command.
•
A maximum of three maintenance user accounts can be created.
•
If the ADTM command data is changed, back up the office data by MEM_HDD command for the change
to take effect in the STBY side.
put
Write the files into FTP server
(Telephony Server).
pwd
Show the full path.
ls/dir
Show the files in the directory.
“ls” shows a list of files and sub directories.
“dir” shows a list of files in detail.
quit/bye
Exit the FTP server.
rename
Change the file name.
Command List Related FTP (Continued)
COMMAND
MEANING
DESCRIPTION