NEC SV8500 Operation And Maintenance Manual - page 806
– 759 –
CHAPTER 7
Maintenance Commands
Output Data
RESULT field:
F_OK:
Database file is normal. (Execute button is active.)
F_ERR:
Database file error occurs. (Execute button is not active. Data assignment is not
available.)
The error occurs when database file is read out because of the following causes.
R_OK:
Data assignment/deletion is finished.
R_ERR:
Data assignment/deletion error occurs.
For the details of error, refer to the operation log file (“PBX Alias name”Op.log)
stored in Maintenance Console (PC).
R_NOT:
No deleting data exists.
Input Data
Cause of Error
INDEX
• Data is not input.
TN
• Data is not input.
• “0-9” is not input with single byte.
• TN is not input correctly in the range of 1-63 (ASYD command
SYS1, INDEX 8).
UGN
• Data is not input.
• “0-9” is not input with single byte.
• UGN is not input correctly in the range of “1-255”.
NAME
• Data is not input.
• Input character is not available for PCPro.
• A blank space is left at the end of name.
• Input name is beyond 24 characters.
CNT
• Data is not input.
• 0-9 is not input with single byte.
• Input name is beyond “20”.
DC
• The number of input DC is fewer than CNT.
• Digit Code (0-9, #, *) is not used.
• Input data is beyond 32 digits.
• The same DC exists in the same row.