NEC SV8500 Operation And Maintenance Manual - page 922
of
975
– 875 –
CHAPTER 7
Maintenance Commands
MBCTC:Make-Busy of Connection Trunk-Continuous for LDM
1. Functional Outline
This command is used to assign the IDLE/BUSY status of connection trunks. By using this command, multiple
trunks can be placed into IDLE/BUSY state simultaneously per a Connection route designated in C_TK
parameter.
2. Parameters
Input data
C_RT:
Route Number
C_TK:
Trunk Number
Note
MB:
Make-Busy Information (0-2)
0=Make Idle
1=Make Busy (Outgoing)
2=Make Busy (Bothway)
Note:
Multiple trunks can be assigned simultaneously per a route designated in TK parameter.