NEC SV8500 Operation And Maintenance Manual - page 784
– 737 –
CHAPTER 7
Maintenance Commands
CFCS: Control of Flash Card System
1. Functional Outline
This command is used to perform SVI loading and checksum verification.
2. Parameters
•
Main Screen
Input Data
System: Select the system to be executed.
System 0
System 1
Control Type: (Not used)
SVI Load and Checksum verify: SVI Load and checksum are performed.
Buttons
Execute:
Execute the selected item on the screen. Selecting “Option “from “Drive Select” menu
displays Drive Selection Screen, which enables you to select the drive to be verified.
Display Issue:
Display the program file issue.
Verify Checksum: Verify the checksum manually.
Exit:
Exit this command.
•
Display Screen
This screen is displayed when clicking Display Issue button.
Output Data
System 0:
The detailed information on each program is displayed on the screen.
System 1:
The detailed information on each program is displayed on the screen.
Buttons
Close:
Close this screen.
•
Manual Checksum Verification Screen
This screen is displayed when clicking Verify Checksum button.