NEC SV8500 Operation And Maintenance Manual - page 865
of
975
– 818 –
CHAPTER 7
Maintenance Commands
DLSS: Display of Lockout Station - Number
1. Functional Outline
This command is used to print the stations in lockout state by station number.
2. Parameters
Input data
Type:
Type of Printout (1-3)
1=Printout of all lockout stations
2=Printout of lockout stations by tenant
3=Printout of lockout stations within a specified range of station number.
TN:
Tenant Number
Start STN:
Maximum six digits
End STN:
Maximum six digits
Note 1:
The parameter is valid only when TYPE=2.
Note 2:
The parameter is valid only when TYPE=3.
Output data
CNT:
Count
TN
Tenant Number
STN
Physical Station Number
LENS
Line Equipment Number