NEC SV8500 Operation And Maintenance Manual - page 718
– 671 –
CHAPTER 5
Operation Procedure for System with PIR
5.6
How to Turn ON/OFF Whole System
This section explains the order to turn ON/OFF the power of the whole system when PIR
is mounted.
Be sure to follow the procedures below to power on/off the system.
5.6.1
Power ON/OFF Procedure for Telephony Server
[System Power ON]
•
1-IMG configuration
PWR/DPWR card on PIR
o
Power module on SV8500 server
•
4-IMG configuration
PWR card on TSWR
o
PWR/DPWR card on PIR
o
Power module on SV8500 server
Note:
To turn on the PIR modules, power on the younger number of PIR module first and then turn on the older
numbers in order (PIR0
o
PIR1
o
PIR2.....).
[System Power OFF]
•
1-IMG configuration
Power module on SV8500 server
o
PWR/DPWR card on PIR
•
4-IMG configuration
Power module on SV8500 server
o
PWR card on TSWR
o
PWR/DPWR card on PIR
Note:
To turn off the PIR modules, power off the younger number of PIR module first and then turn off the older
numbers in order (PIR0
o
PIR1
o
PIR2.....).
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required