NEC SV8500 Operation And Maintenance Manual - page 908
– 861 –
CHAPTER 7
Maintenance Commands
[Output Data]
System-0 operating status
Note 1
System-1 operating status
Note 1
System-Act IP address
System-0 IP address
Note 2 Note 3
System-1 IP address
Note 2 Note 3
Subnet Mask (default: 255.255.0.0)
Note:
Information of LAN2 will be displayed.
Note 1:
The color for the operating status means as shown below.
Note 2:
When the IP address of MGC is not assigned by the ADTM command or assigned to 0.0.0.0, the default
data is indicated as follows.
Note 3:
In single configuration, the blank is indicated.
• Buttons
COLOR
STATUS
ping
Green
Operating normal (ACT)
Available
Yellow
Operating normal (STBY)
Available
Red
Stop
Not available
Gray
Not mounted
Not available
SP/LP
LP Number Default IP Address (System-0) Default IP Address (System-1)
SP
-
172. 16. 253. 0
172. 16. 253. 1
LP
0
172. 16. 253. 30
172. 16. 253. 31
LP
4
172. 16. 253. 38
172. 16. 253. 39
LP
8
172. 16. 253. 40
172. 16. 253. 41
LP
12
172. 16. 253. 48
172. 16. 253. 49
LP
16
172. 16. 253. 50
172. 16. 253. 51
LP
20
172. 16. 253. 58
172. 16. 253. 59
LP
24
172. 16. 253. 60
172. 16. 253. 61
LP
28
172. 16. 253. 68
172. 16. 253. 69