NEC SV8500 Operation And Maintenance Manual - page 967
– 920 –
APPENDIX A
STEP 2
Start up maintenance console’s PCPro Tools.
Select “Tool” — “Install Data Registration Setting” from the menu bar.
This opens “Install Data Registration Setting” window.
STEP 3
In “Install Data Registration Setting” window:
1. From “Install Data List,” select data you wish to install.
2. Press “Detail” button.
3. This opens “Install Data Detail” window.
Note 1:
Follow the procedures below when wishing to add a new directory in “Install Data List.”
1. In “Install Data Registration Setting” window:
a. Press “Add” button in “Install Data List” field.
b. This opens “Setting Install Data Name” window.
2. In “Setting Install Data Name” window:
a. Enter desired name in “Install Data Name” box.
b. Press “Setting” button.
c. This takes you back to “Install Data Registration Setting” window.
STEP 4
In “Install Data Detail” window:
1. Select “Patch” from “Data Kind” pull–down menu.
2. Press “Import” button.
3. This opens “Data Import” window.
STEP 5
In “Data Import” window:
1. For “Import Data” field, select the directory used in STEP 1.
2. Enter desired data name in “Install Data Name” box.
3. Press “Import” button.
4. This will save the patch files to the maintenance console.
STEP 6
Make sure the data name entered in STEP 5–2 appears in “Install Data List” of “Install Data De-
tail” window.
STEP 7
In PCPro Tools’ Main menu:
1. Select the following:
• Operation:
Patch
• System Side:
System 0/System 1
• Drive:
A/D
• Connection Account Name:
Destination for connection (pre–registered)
2. Press “Execute” button.