MA Lighting grandMA2 User Manual - page 1001
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Important:
Settings that can be made on the y-axis –
Single Y, Block Y, Align Group Y
– are enabled only if the
interleave is applied.
Interleave:
Sets the interval.
1. To increase the interval of the MAtricks, press and hold
Set
and press
Next
.
2. To decrease the interval of the MAtricks, press and hold
Set
and press
Prev
.
MAtricks Filter:
Sets the filters Off, OddID, EvenID.
Off: No filter.
OddID: Selects fixtures with an odd number.
EvenID: Selects fixtures with an even number.
1. To set a filter, tap
MAtricks Filter
and the
pop-up Select Input
opens.
Select filter
2. Tap to select the filter.
Single X:
Selects the MAtricks in the vertical order.
To move through the selection, use
Prev
or
Next
.
Single Y:
Selects the MAtricks in the horizontal order.
To move through the selection, press and hold
and press
Prev
or
Next
.
Block X:
Creates blocks in the vertical order.
Block Y:
1001