MA Lighting grandMA2 User Manual - page 1031
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
5. The direction is now applied.
It is also possible to change the direction of an effect by tapping the button
Direction Forward
. To toggle between
the directions, tap the button accordingly.
Low Value:
Sets the lowest point an effect reaches.
High Value:
Sets the highest point an effect reaches.
To set the low and the high values:
1. Tap the corresponding column.
2. The calculator opens.
Calculator – low values
4. Set the value or tap a preset on the right of the calculator and then tap
Please
.
5. The value is now set.
Hint:
It is also possible to set a range of values in
Low Value
and
High Value
.
1. Type in the calculator the value starting the range.
2. Tap
Thru
.
3. Then type the second value ending the range.
Phase:
Displays the time setting that single fixtures use within an effect.
Phase is distributed among the number of fixtures.
1031