MA Lighting grandMA2 User Manual - page 426
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
9.2.185. MidiControl Keyword
To get the MidiControl keyword in the command line, type
MidiControl
in the command line or the shortcut
MidiC
.
Description
The MidiControl keyword is a function keyword to transmit MIDI control change messages via the MidiOut port.
If no MIDI channel is given, the MIDI channel of the MIDI Show Control in the Setup is used.
Syntax
MidiControl [controller] [value]
MidiControl [midichannel].[controller] [value]
Example
To transmit a value of 64 for controller 1, type in the command line:
[Channel]> MidiControl 1 64
9.2.186. MidiNote Keyword
To use to the MidiNote keyword, type
MidiNote
or the shortcut
Mn
in the command line.
Description
With the MidiNote command, you send MIDI Note messages via the Midi Out port at the back of the console. For
more information, see
.
If a MIDI channel is entered in the command, the entered MIDI channel will be used.
If no MIDI channel is entered, the MIDI channel in the
Setup -> Midi Show Control
is used.
If a velocity is entered in the command, the entered velocity will be used.
If no velocity is entered, a velocity full (127) will be used.
If the Off command is used, a MidiNote Off is sent.
For more information on the configuration of MIDI Remotes see
Syntax
MidiNote [note]
MidiNote [midichannel] . [note]
MidiNote [note] [velocity]
MidiNote [midichannel] . [note] [velocity]
MidiNote [note] Off
426