MA Lighting grandMA2 User Manual - page 1032
of
1433
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
To set the phase:
1. Tap the corresponding column.
2. The calculator
Edit EffectLine Phase
opens.
Pop-up – phase
4. Set the degrees in the numeric pad or tap the buttons on the right of the calculator.
5. The phase is now applied.
Width:
Sets the width of an effect.
Important:
Width is not applied with the form Chase.
Example:
If you set the width of the form Pwm to 20 %, this percentage is displayed as the high value and the residual 80 %
display the low value.
To set the width:
1. Tap the corresponding column.
2. The calculator opens.
1032