MA Lighting grandMA2 User Manual - page 913
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
The top area labels the master and in the group masters it also provides information about the executor number
where it is assigned, the group number and the masters Mode.
The two buttons in the lower right side of the square gives access to set the master to
Full
and to
Zero
.
There are 6 buttons below the master squares. They are:
All Positive Full
All Positive Zero
All Negative Full
All Negative Zero
All Additive Full
All Additive Zero
They can be used to set each of the three types of masters to either Full or Zero.
Speed Master
Speed masters can be used to synchronize multiple Effects or Chasers to a common speed. Read more about the
speed masters in the
.
This is what each speed master looks like:
Speed Master
The three buttons in the master gives access to double the speed (DS), half the speed (HS), or "tap" the speed using
the
command.
There are three buttons below the speed masters. They are:
All Double Speed
:
This will double the speed on all the speed masters.
All Half Speed
:
This will double the speed on all the speed masters.
All Learn
:
This will perform the Learn command on all the speed masters.
Rate Master
913