MA Lighting grandMA2 User Manual - page 722
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Natural:
This displays the value defined in the "From" and "To" columns in the fixture profile. The range is customized, but
is is always displayed with one decimal accuracy. It can even be a negative value. This can be useful when the
attributes default values is not at the end of the range - for instance with Pan attributes.
Percent:
Displays the attribute values as a percent without any decimal numbers. Range is 0 through 100.
Decimal:
Displays the attribute values as an 8-bit DMX value. The range is from 0 through 255.
Hex:
This displays the DMX values in 8-bit Hexadecimal numbers. The range is from 0 through FF.
Physical:
This displays the value defined in the "From Phys" and "To Phys" columns in the fixture profile. Just as with the
Natural readout, it is possible to customize the range but it is always displayed with one decimal accuracy. The
idea is that values here matches the physical values for the fixtures. So for instance the zoom range of a fixture is
matched to the physical range of the fixture making the sheets display the actual zoom degree.
Decimal16:
This is just like the Decimal readout except the DMX value is displayed in a 16-bit range. The range is from 0
through 65 535.
Hex16:
This is just like the Hex readout except the DMX value is displayed in a 16-bit range. The range is from 0 through
FFFF.
Changing the readout for a sheet and then tapping in the sheet will also change the readout on your Encoder Bar.
Readout can also be a
Cue Color Columns
Cue Color Columns
is an option in Executor and Tracking sheets.
The
can be used to give a color to individual cues. This option changes how this color is
displayed in the sheets.
Tapping the button opens the small Select Cue Color Columns pop-up. It has two different sizes regarding the
options. There are more options in the Executor sheet than in the Tracking sheet. This is the pop-up from the
Executor sheet:
722