MA Lighting grandMA2 User Manual - page 851
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Triangle pointing up:
This symbol means that the executor is currently assigned the "High LTP" priority.
L:
This symbol means that the executor is currently assigned the "LTP" priority.
Triangle pointing down:
This symbol means that the executor is currently assigned the "Low LTP" priority.
T:
The "T" is there if the sequence is set as a tracking sequence. Read about tracking in the
.
The different priorities are described in the
.
On the right side there is another number. This is the
sequence
number. If this number has a different background
color, then there is a
applied.
The second line in the top part is the name of the sequence.
The background color have different meanings:
Black
:
This is the normal background color.
Green
:
The executor is selected.
Orange
:
The executor is fixed.
Red
:
The Assign Menu is open for this executor.
Dark Red
:
The temporary Edit Sequence pop-up is open.
Middle Part
The middle part usually displays one or three cues. If a sequence only has one cue, then only one is displayed. If
there are multiple cues in the sequence then three lines with cues are displayed.
The top cue is the previous active cue or the cue that will be active should a GoBack action be performed. The
middle cue is the currently active cue - if there are no active cue, then this line will be empty. The bottom cue will
be the next active cue if a Go (forward) action is applied.
If a cue is active, it will have a blue background. If the cue is fading in, then the blue background is visualized as a
blue bar moving from the left to the right.
Pressing or clicking in this area will open a temporary
.
The middle part can look very different if it is "located" using the
. It will look like this:
851