MA Lighting grandMA2 User Manual - page 651
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Quick steps:
1. Press
Setup
and
Patch & Fixture Schedule
to enter the EditSetup menu.
2. Add a new or select an existing layer.
3. In the layer, Add new fixture.
4. Follow the Fixture Wizard.
1. Import a fixture from library (internal or from USB) or select already imported fixtures from
the list.
2. Change the quantity.
3. Set a Fixture ID and/or Channel ID.
4. Set the start address for the first fixture.
5. Tap
Apply
.
5. Check that the result is correct.
6. Exit the EditSetup menu.
7. Tap
Yes
to confirm the changes.
This was the quick steps - Keep reading for more details.
Adding fixtures to the show is done from the
EditSetup menu
- also called Patch & Fixture Schedule. This can be
found by pressing the
Setup
key and then
Patch & Fixture Schedule
.
It could look like this:
EditSetup menu
This is one of the essential access points for everything that has to do with your entire fixture setup structure. A very
important menu.
651